Design idea

Steel Blue and Ivory Majlis with X-Strap Pillows

The steel-blue majlis with X-strap pillows wraps a long room in blue velvet seating, pale armrests and light bands along the back. Cross-shaped tables combine dark tops with marble-look sides. Their central grouping repeats the diagonals on the pillows, giving the two long side runs a point to face across the patterned rug.

Long steel-blue and ivory velvet seating around three walls, with a cross-shaped table group and blue-gray rug medallions

Photos of this design

Angled view along a blue velvet seating run with ivory armrests, X-strap pillows and pale tables with dark tops
Angled view along a blue velvet seating run with ivory armrests
View from the end of a long steel-blue majlis run toward the window seating, cross tables and patterned ivory rug
View from the end of a long steel-blue majlis run toward the window seating
Top view of dark cross-shaped table tops edged in gold above marble-look sides, on an ivory and blue medallion rug
Top view of dark cross-shaped table tops edged in gold above marble-look sides
Blue velvet seating with pale bands and X-strap pillows along a window wall, beside cross tables and a blue-bordered rug
Blue velvet seating with pale bands and X-strap pillows along a window wall
Blue velvet seating beneath white sheers, with pale armrests, diagonal pillow straps and a blue-bordered medallion rug
Blue velvet seating beneath white sheers

Questions buyers ask

Do the steel-blue photos reveal what is inside the ivory-edged seat base?

The photographs show upholstery and trim, so they do not establish the hidden construction. A custom majlis can use an all-foam build or foam seating over an MDF and wood frame. Specify the chosen construction separately from the blue fabric and ivory edging.

From the atelier

Must a long steel-blue seating run keep only the two ivory armrests at its ends?

Armrests can be spaced within a custom run as well as at the ends. Their quantity follows the seating length and available space. A small L commonly takes two to four, while a large U may use six or more. Confirm the arrangement on your own layout.

From the atelier

How do the steel-blue side runs frame the cross tables?

  • Blue velvet seats and backrests follow three walls.
  • Ivory armrests and pale bands divide the blue upholstery.
  • Square pillows carry crossing diagonal straps.
  • Dark table tops sit above pale marble-look sides.
  • An ivory rug carries blue-gray medallions and a patterned border.
  • White sheers hang between blue-gray drapes.

Two side runs face the table group; the shorter run sits under the far window. I would keep their shared center clear. Compare this arrangement with the rooms in majlis design ideas.

What build can sit beneath the steel-blue and ivory outline?

The pale edges outline the cushions but do not reveal a frame inside. Foam can supply the whole seating build; another option places foam seats on an MDF and wood structure. Discuss that choice before copying the raised appearance.

A custom majlis seat is about 29.5 in (75 cm) deep. Foam heights can be 4 in (10 cm), 8 in (20 cm), 12 in (30 cm) or 16 in (40 cm). A wooden-base model stays at 14.5 in (37 cm) to 16 in (40 cm), depending on the model, and is not made lower. These are build choices, rather than measurements taken from this photograph.

Long straight sides become equal seat pieces. For example, 146 in (370 cm) becomes two 73 in (185 cm) cushions, each within the 75 in (190 cm) maximum. Draw the full walls and let the layout account for the corners.

Which steel-blue details repeat across the window and floor?

DetailVisible positionDesign reference
Pale bandsAcross the blue back lineRepeated divisions between seat sections
Cross strapsOn the square pillowsDiagonal shapes against plain velvet
Cross tablesIn the center of the rugSeparate dark tops with pale sides
Blue-gray drapesAt the windowsA repeated color above the seating
Medallion rugInside the seating runsBlue-gray figures on an ivory ground

The tables repeat the pillow diagonals against plain seats. In a smaller room, I would review their quantity separately. The photographed size is not a room measurement.

What should a steel-blue layout request identify?

  1. Label the window wall and both side walls on one sketch.
  2. Measure each complete seating wall and mark the doorway opening.
  3. List the cross-table group, rug and curtains separately from the seating.

The custom seating quote covers cushions, backrests, armrests and pillows. Treat the tables, curtains and rug as separate add-ons. Measure curtains for each window and specify the room rug; some rug types use fixed sizes. Custom orders start with a layout plan for your approval.

Review the arrangement with the accessories in place. Custom orders are photographed and filmed for your approval before they ship.

The plain seat surfaces fit among modern majlis designs, while the ivory divisions keep each run readable.

Frequently asked questions

Must the cross-table group accompany the steel-blue seating?

Tables are ordered separately from the custom seating. You can request the visible grouping, fewer tables or no table set. Record that decision alongside the layout, so the center stays useful rather than treating every photographed object as included.

Can the ivory X-straps be kept while the steel-blue color changes?

Most designs can use other colors from the fabric range. Identify the X-straps as a detail you want to keep, and distinguish them from the pale backrest bands. Confirm the chosen fabric and trim combination before production.

Does the far window prove the height of this steel-blue back line?

No height can be read reliably from the photographed window. Supply your own sill height and choose the seating height separately. The layout should show the back line below the window using the actual dimensions of your room.

Get a quote العربية Message the atelier